Frame Tack Picture Hanging Kit

Installing picture frame hardware may seem rather simple to do and only requires a couple of steps, however there is more to it than meets the eye. If you use the wrong type of frame hardware or don’t know where or how to properly install it, installing picture frame hardware can be a bit tricky. So, here are a couple of tips for installing picture frame hardware on your wall frame. Frame Tack Picture Hanging Kit

Step #1: Use the Correct Picture Frame Hardware

Many quality ready made picture frames already have picture frame hardware installed if they’re designed for hanging on the wall. However, if your frame doesn’t have hanging hardware attached, then you’ll either need to do it yourself or pay a frame retailer to do it for you. If you want to install the hardware yourself, there are two main kinds of hanging hardware you can use: saw tooth hangers and eye hooks (both of which can be found at your local hardware store).

Aim and Hang

If your wall picture frame is smaller than 11×14, you should use a saw-tooth hanger as these are easier to install. Saw tooth hangers come in a couple of different sizes. If your wall frame is smaller than 8×10, use a small or medium-sized saw-tooth hanger. If your frame size is between an 8×10 and an 11×14, you should use a large saw tooth hanger. If you have a heavy or large picture frame, it is recommended you use two eye hooks as they can hold more weight and accommodate larger size picture frames. Eye hooks require more effort to install than saw-tooth hangers, but the added support is needed for large, heavy frames.  World’s First and Only- Aim and Hang

Step #2: Determine How You Want to Hang the Frame

Your first step is to determine the direction you want your wall frame to hang. Once that is determined, you can begin installing the proper picture frame hardware.

Saw-tooth hangers need to be attached centered and straight on the frame or your picture will not hang properly. To align correctly and find the center of the frame, measure the width of the frame and divide that measurement in two. This number will be the center of where the saw tooth hanger will be attached. If you need help getting it straight, simply use a small level to get the hanger straight on the frame.

hanging photo display strip for vertical prints

Eye hooks are attached by screwing them into the wood of the frame molding. This helps support the weight of the frame when hung on the wall. To determine where the eye hooks should go, you’ll need to measure to be sure they’re evenly positioned. Measure a third of the way down from the top of the frame and mark both the left and right hand sides. These marks will be where the eye hooks will go. Pre-drill holes once you are sure the marks are even. Once the eye hooks are screwed evenly into each side of the frame, string a wire through both of the eyes and secure. Make sure to leave some extra room in the wire so the frame will hang properly on the wall. Wall of Frames 6-FOOT hanging photo display strip for vertical prints

If you’re handy, you should be able to easily install the picture frame hardware all by yourself. If you are reluctant to tackle this job, ask your frame retailer to do it for you. Although it’s not hard doing it yourself, once you see it done or have an example to follow it will be easy doing it next time by yourself.

If you click on any of the links on this website and make a purchase, the site owner may receive a sales commission.

Technorati Tags: Aim and Hang, eye hooks, frame hardware, Frame Tack Picture Hanging Kit, hanging art, hanging hardware, hanging photo display strip for vertical prints, hanging wall frame, hanging wall frames, install picture frame hardware, installing picture frames, picture frame, picture frame hardware, picture frames, picture framing hardware, ready made picture frame, ready made picture frames, saw-tooth hangers, wall frame, wall frames, wall picture frame, wall picture frames